Velleman-projects K8093 User manual Manuale Utente Scaricare il pdf (Pagina 10)

- 10 - - 11 -

Driver installation & programs

IV. ARMING THE UNIT

Out of the box no remotes are assigned for safety reasons. When the unit powers up it is always armed!

Unit is capable of storing 4 remotes, FIFO.

The stored remotes can be cleared from memory by holding the LEARN button while powering up, The unit will beep 10 times

(fast) to indicate the erasing process.

STATUS INDICATION (LD3)

LEARNING A REMOTE:

1. Press the “Learn”-button once, the status LED light continious. The unit is ready for learning a remote (there is a timeout!).

2. Hold the 2 buttons of the remote pressed. Release the buttons when the status LED turns off , the remote is learned.

REMOTE CONTROL:

1. DISARM

2. ARM

Power

supply

Relay

Door contact

GND*

(*) If you want to connect a 12V

siren directly to the relay you can

connect the +12V of the input volt-

age to the COM. Connect the nega-

tive lead of the siren to the leftmost

(-) connector and the positive to

the NC or NO contact of the relay.

III. CONNECTION DIAGRAM

��

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Nessun commento

Velleman-projects K8093 User manual Manuale Utente Pagina 10