Velleman-projects K5201 Assembly instructions Manuale Utente Scaricare il pdf (Pagina 12)

When mounting the kit in an enclosure you

should make sure the enclosure is sufficiently

insulated according to local norms.

The complete PCB is best fixed to the front panel of

the casing, so that all controls are accessible and the

LED's are visible.

Make holes in the front panel as shown in figure 3.0.

Mount the PCB on the front panel with help of the

included bushes and bolts.

Place buttons on the spindles of the potentiometer

(spindle diameter 5.9mm) and the rotary switch

(spindle diameter 6.3mm) (shorten the spindle if nec-

essary).

18. FINISHING

Finishing

All values are in mm. (1mm = 0.04")

FIG. 3.0

1 2 ... 7 8 9 10 11 12 13 14 15 16

Nessun commento

Velleman-projects K5201 Assembly instructions Manuale Utente Pagina 12